Reverse-Control Function
The reverse-control feature allows a connected mouse or touch interface to operate the host device remotely.
To perform a right‑click, press and hold the left mouse button, then release it.
Important restrictions:
- Reverse control is only supported when the host device is in Duplicated Display mode.
- This feature is not supported on macOS.
- Keyboard input is not supported when using the reverse‑control function.
Touchscreen and Mouse Usage Guidelines
- Do not connect a USB touchscreen and a USB mouse at the same time.
The protocols used by touchscreens and mice differ. When both are connected, the Aero Base Station may not correctly recognize or transmit the input signals to the Aero Presenter Button, which can cause malfunctioning or unexpected behaviour. - Ensure that the USB cable between the touchscreen and the Aero Base Station (Rx) is shorter than 2 meters. Since the Aero Base Station is a low‑power device, longer USB cables can lead to signal degradation. ACT tested a 1.5‑meter cable, which performed reliably. If you experience connectivity issues, using a shorter cable is recommended.