The Aero Base Station can be connected to an existing Wi-Fi network by following these steps:
- Prepare the Base Station
- Make sure the Base Station does not have a LAN cable plugged in.
- Disable Miracast by navigating to Network Settings → Miracast Settings and deselect the Enable option.
- Restart the Base Station
- Restart the Base Station by going to Maintenance → Restart and pressing the Restart button.
- Configure Wi-Fi Settings
- After the Base Station is rebooted, connect to its Wi-Fi network and log in to the web interface.
- Navigate to Settings → Network Settings → Wi-Fi WLAN Settings enter the SSID and password, then click Connect.
4. Restart and connect
- Restart the Base Station by going to Maintenance → Restart and pressing the Restart button. After the Base Station is restarted, connect your device to the Wi-Fi of the Base Station.
Once configured, the Base Station will connect to the specified Wi-Fi network. Devices connected to the Base Station's Wi-Fi will gain internet access through the Base Station's wireless bridge functionality.